Dave, Ah, good. Glad to hear that. Measuring between frames is possible, even in 10.2. You should at least see your measurement table updating, even if you don't see it on screen. Here's what I see using cyclohexane_movie.xyz:
frame 1; #just one model visible measure (atomno=1 and */1) (atomno=3 and */10) measure (atomno=1 and */1) (atomno=3 and */11) measure (atomno=1 and */1) (atomno=3 and */21) show measurements Measurement Information distance 2.6147435 0.261 nm C 1/1 #1 C 3/10 #3 distance 2.6083157 0.261 nm C 1/1 #1 C 3/11 #3 distance 2.479709 0.248 nm C 1/1 #1 C 3/21 #3 I don't see any measure marked on the model until I display two models having connecting measures. So: frame 1 #nothing frame 10 #nothing frame range 10 11; frame 0 #nothing frame range 1 10; frame 0 #now I see that first measure If this doesn't work for you, I don't know.... Do you think the following would be useful? frame set 10,11; frame 0 #just displays frames 10 and 11 frame set 1,2,4-6; frame 0 #just displays frames 1, 2, 4, 5, and 6 ? I think that would be pretty simple to add. Bob [EMAIL PROTECTED] wrote: >(relates to 10.x) > >Bob, > >I've tested all the operations I need and >any others I can think of, and it works very well. >Thank you, I'm impressed by the quick work >and I hope it benefits other users too. > >One more suggestion is for measurements across >frames. >If 'set measureAllModels ON' is on, >currently > >measure (atomno=1 and */1) (atomno=1 and */2) > >does nothing (I think). I think it might be nice >if it created a measurement between atom 1 in frame 1 >and atom 1 in all other frames, so you could >immediately track the motion of an atom across all frames. >Not essential for anything I'm doing myself, just a >thought for others to comment on. > >Thanks again, > > >Dave > >On Wed, 14 Jun 2006 16:53:00 -0500, "Bob Hanson" <[EMAIL PROTECTED]> >said: > > >>Dave, >> >>OK, this should all be in 10.x.13 Whew! That took longer than I had >>imagined it would. What was meant to be a minor addition turned out to >>be a full rewrite of the measurement code. But it is MUCH more flexible >>now, and I think you will like it. Your suggested improvements are all >>absolutely excellent. I really like >> >> set measureAllModels >> >>and the ability to create and delete measurements like that for all >>models. This HAS to be useful! >> >> >>[EMAIL PROTECTED] wrote: >> >> >> >>>set showMeasurements only toggles the the distance/angle labels >>>not the lines. >>> >>> >>> >>Well, not quite. I know, it's confusing: >> >>set measurements off # turn off label only; leave the line >>set showMeasurements off #turn off label and line >> >>the latter works in 10.2 but is broken in 10.3 (probably my fault) >> >>To 10.x.13 I've added: >> >>set measurementNumbers ON/OFF >>#as a preferred equivalent to "set measures ON/OFF" (left in for >>compatibility) >>#does not persist through file loading (by the way) >> >>set showMeasurements ON/OFF >>#as before; DOES persist through file loading (by the way) >> >>and new: >> >>measurements OFF # doesn't delete measurements; just hides them. >>measurements DELETE # this does delete them >>measurements ON # turns them back on if they are off >> >>Along with this update comes something I've been meaning to add for some >>time: >> >> measure ALLCONNECTED (carbon) (oxygen) >> >>As an alternative to using a range: >> >> measure 1.0 2.0 (carbon) (oxygen) >> >>to good effect. >> >>Since now we have a distinction between "OFF" and "DELETE" we also have >>the capability to turn on and off SELECTED measurements. So, for >>example, you can say: >> >> measure OFF ALL (carbon) (oxygen) >> >> measures DELETE 1.2 1.5 (carbon) (oxygen) >> >>I do NOT recommend: >> >> set measureAllModels; measure ALL (*) (*) >> >> >>Please check it out and see if this does what you want. I've put up a >>test page at >> >>http://www.stolaf.edu/people/hansonr/jmol/test/proto/measure.htm >> >>that I THINK tests just about everything conceivable. >> >> >> >> >>>The measurement table in Jmol.jar is broken, as deletions carried >>>out in scripts or from the viewer are not seen in the table, >>>which then becomes unuseable. >>> >>> >>> >>I meant to say, "with my latest fixes" >> >> >> >>>The measurement tick boxes in the viewer popup, and the application >>>menu are broken. >>> >>> >>> >>> >>not any more. >> >> >> >>>As a feature request, I would like deletions of measurements when >>>'set MeasurementAllModels ON' is on to be propagated across all models. >>> >>> >>> >>> >>done. >> >> >>Bob >> >> >> >>_______________________________________________ >>Jmol-developers mailing list >>[email protected] >>https://lists.sourceforge.net/lists/listinfo/jmol-developers >> >> _______________________________________________ Jmol-developers mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jmol-developers
