-----Original Message----------------------------------------- From: Erdem Sener [mailto:[EMAIL PROTECTED]
will something like " show interfaces terse | match -0/1/ | match down" work for you ? (assuming that the PIC is in FPC0/Slot1 ---------------------------------------------------------------- --- [EMAIL PROTECTED] wrote:--------------------------------- That shows: fe-0/1/0 up down fe-0/1/1 up down fe-0/1/2 up down fe-0/1/3 up down ---------------------------------------------------------------- It looks like your OC-12 card isn't in that slot. Do this: RE0> show interfaces terse Interface Admin Link Proto Local so-0/0/0 up up so-0/0/0.0 up up inet xxx.xxx.xxx.xxx/30 and find the interface in question. Then do this: RE0> show interfaces so-1/1/0 extensive except do the interface where your card is. My OC-12 is in slot 1/1 in this case. It will show you everything you need WRT alarms. Look for this, in particular: Traffic statistics: Input bytes : 12641132131142 263211016 bps Output bytes : 11208745208763 251734288 bps scott Josh -----Original Message----- From: Erdem Sener [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 23, 2007 10:20 AM To: Josh L. Richesin Cc: Jared Gull; [email protected] Subject: Re: [j-nsp] OC12 PIC will something like " show interfaces terse | match -0/1/ | match down" work for you ? (assuming that the PIC is in FPC0/Slot1 On 1/23/07, Josh L. Richesin <[EMAIL PROTECTED]> wrote: > I have a bunch of t1's ds3's and oc3's hanging off of this interface. > Is there a command that would show me which ones might be down? > > Thanks, > Josh > > > -----Original Message----- > From: Jared Gull [mailto:[EMAIL PROTECTED] > Sent: Tuesday, January 23, 2007 9:33 AM > To: Josh L. Richesin; [email protected] > Subject: Re: [j-nsp] OC12 PIC > > Josh, > > What is the current state of the interface (i.e. show interface > so-x/y/z extensive)? If the PIC is operational and the circuit is up > it should be green. > > -Regards, > > Jared > --- "Josh L. Richesin" <[EMAIL PROTECTED]> wrote: > > > Hello, > > I have a Juniper m10i and I just notcied that the status light on > > the pic is amber. Is this normal? I don't remember it being amber. > > I did a show system alarms and didn't see any alarms. > > > > Thanks, > > Josh > > > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > ______________________________________________________________________ > __ > ____________ > Get your own web address. > Have a HUGE year through Yahoo! Small Business. > http://smallbusiness.yahoo.com/domains/?p=BESTDEAL > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Erdem _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
