Jared, i've done this on most of my network. However the 12 port FE pic (P/PE-12FE-TX) only does 1532 bytes max MTU (and this only with newer firmware...). This is why i am asking.
Regards, Jonas On Sun, 2007-04-15 at 23:17, Jared Mauch wrote: > there should be no reason you can't increase your 'mpls infrastructure' > MTU to something larger, eg: 4470 or otherwise. Some providers have gone as > far as increasing the internal MTU to the 9k range. This can have some > serious wins in some cases, eg: tcp performance as it relates to > ibgp messages. > > - jared > > On Sun, Apr 15, 2007 at 05:46:48PM +0200, Jonas Frey wrote: > > Hello, > > > > i'am looking to deploy a vlan-ccc l2circuit (via MPLS). The customer > > wants to use MPLS himself on this circuit so i am wondering what MTU > > would be needed for this to work. I am calculating with 1526 bytes, is > > this correct? > > > > Any help appreciated. > > > > Regards, > > Jonas > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
