With 1524 to 1530 of MTU size should works, but remember you will need to increase the MTU on your Switch too..
Greetings :) Jonas Frey escribió: > Jared, > > i've done this on most of my network. However the 12 port FE pic > (P/PE-12FE-TX) only does 1532 bytes max MTU (and this only with newer > firmware...). This is why i am asking. > > Regards, > Jonas > > On Sun, 2007-04-15 at 23:17, Jared Mauch wrote: > >> there should be no reason you can't increase your 'mpls infrastructure' >> MTU to something larger, eg: 4470 or otherwise. Some providers have gone as >> far as increasing the internal MTU to the 9k range. This can have some >> serious wins in some cases, eg: tcp performance as it relates to >> ibgp messages. >> >> - jared >> >> On Sun, Apr 15, 2007 at 05:46:48PM +0200, Jonas Frey wrote: >> >>> Hello, >>> >>> i'am looking to deploy a vlan-ccc l2circuit (via MPLS). The customer >>> wants to use MPLS himself on this circuit so i am wondering what MTU >>> would be needed for this to work. I am calculating with 1526 bytes, is >>> this correct? >>> >>> Any help appreciated. >>> >>> Regards, >>> Jonas >>> >>> _______________________________________________ >>> juniper-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/juniper-nsp >>> > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
