Jason, Locally originated BGP traffic is classified into Q0 by default (except BGP retransmissions) http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-cos/html/cos-hardware4.html#1197876 --and AFAIK, it is impossible to override this behaviour. So, in an essence, you can guarantee bandwidth to BGP traffic _through_ the router but not to locally-originated BGP traffic. Rgds Alex
----- Original Message ----- From: "Jason J. W. Williams" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Saturday, April 21, 2007 1:26 AM Subject: [j-nsp] Using QoS to ensure BGP bandwidth > Hello, > > I've been investigating using QoS to ensure BGP traffic out of our > router to the peer gets transmitted even when the line is at full > saturation. I was going to use a firewall filter to assign all BGP to > a queue with strict-high priority, however it appears that > network-control traffic is assigned to queue 3 by default which should > supersede all other traffic that appears to default to queue 0. Am I > reading this wrong? Thank you in advance for your help! > > -J > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
