Hi All, It's worth pointing out that there is no implicit link between Q0 and a particular scheduler or behaviour. If you want to use Q0 for control traffic, then do that. Just make sure that all non-control traffic gets put into a different queue. That's not particularly difficult if you put a MF classifier at all the ingress points to your network and default all traffic into Q3, for example.
Rgds, Guy On 22/04/07, Thomas Mangin <[EMAIL PROTECTED]> wrote: > Alex wrote: > > Jason, > > Locally originated BGP traffic is classified into Q0 by default (except BGP > > retransmissions) > > http://www.juniper.net/techpubs/software/junos/junos82/swconfig82-cos/html/cos-hardware4.html#1197876 > > --and AFAIK, it is impossible to override this behaviour. So, in an essence, > > you can guarantee bandwidth to > > BGP traffic _through_ the router but not to locally-originated BGP traffic. > > > Never tried, just a mad idea. > > If using trunking to switches : create two vlan, one for control one > traffic. Use the control vlan for BGP traffic but make the next hop the > IP of the traffic interface ? This way you can limit the bandwidth on > the customer vlan and be sure that some is left on the "control" one. No > idea if you can apply the same idea to your IGP as well. > > Thomas > PS: I do not pretend it is a sane idea neither. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
