Thanks for the response. I've tried this and I get the following error:
[EMAIL PROTECTED] commit check
re0:
error: The routing instance(m20a) is not configured
error: configuration check-out failed
Seems like the 'routing-instance' only allows routing-instances and not
logical-routers. :-(
-evt
________________________________
From: BRIANT Alain [mailto:[EMAIL PROTECTED]
Sent: Thursday, September 27, 2007 10:48 AM
To: Eric Van Tol
Cc: [email protected]
Subject: Re: [j-nsp] SNMP for logical routers
Yes Eric
I have tried this and it's working well
here is a sample config with a routing-instance
I believe it working also with a logical router the same way:
You will need the highlighted statements to have it working.
Alain
interfaces {
fe-0/0/0 {
unit 0 {
family inet {
address 10.20.0.11/24;
}
}
}
}
snmp {
community public {
authorization read-only;
routing-instances reseau1;
}
routing-instance-access;
}
routing-instances {
reseau1 {
instance-type virtual-router;
interface fe-0/0/0.0;
routing-options {
static {
route 0.0.0.0/0 next-hop 10.20.0.1;
}
}
}
}
Eric Van Tol a écrit :
Hi all,
According to this link:
http://www.juniper.net/techpubs/software/junos/junos84/rn-sw-84/rn-new-f
eatures.html
SNMP separation has been added for logical routers. This link:
http://www.juniper.net/techpubs/software/junos/junos84/feature-guide-84/
id-11160689.html#id-11160689
states the same thing and directs you to look at the JUNOS
Network
Management Configuration Guide for more information. However,
that
portion of the documentation does not mention any such feature.
Has anyone tried to configure this, and if so, have you been
able to get
it to work? Any other documentation I should be looking at for
this
feature?
thanks,
evt
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
