Hi Eric Just have a look at theses documents and try to remove the statement under community "routing-instances m20a" that I think you have configured.
After that follow what is written in those documents... You have to add the LR name to the community in your SNMP requests. regards Alain http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-net- mgmt/id-10826503.html#id-10826503 http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-net- mgmt/jN18158.html#jN18158 ---- Messages d´origine ---- De: "Eric Van Tol" <[EMAIL PROTECTED]> Date: Jeudi, Septembre 27, 2007 5:11 pm Objet: RE: [j-nsp] SNMP for logical routers > Thanks for the response. I've tried this and I get the following > error: > [EMAIL PROTECTED] commit check > re0: > error: The routing instance(m20a) is not configured > error: configuration check-out failed > > Seems like the 'routing-instance' only allows routing-instances > and not logical-routers. :-( > > -evt > > > > > > > ________________________________ > > From: BRIANT Alain [mailto:[EMAIL PROTECTED] > Sent: Thursday, September 27, 2007 10:48 AM > To: Eric Van Tol > Cc: [email protected] > Subject: Re: [j-nsp] SNMP for logical routers > > > Yes Eric > > I have tried this and it's working well > > here is a sample config with a routing-instance > I believe it working also with a logical router the same way: > You will need the highlighted statements to have it working. > > Alain > > > > interfaces { > fe-0/0/0 { > unit 0 { > family inet { > address 10.20.0.11/24; > } > } > } > } > snmp { > community public { > authorization read-only; > routing-instances reseau1; > } > routing-instance-access; > } > routing-instances { > reseau1 { > instance-type virtual-router; > interface fe-0/0/0.0; > routing-options { > static { > route 0.0.0.0/0 next-hop 10.20.0.1; > } > } > } > } > > > > > Eric Van Tol a écrit : > > > Hi all, > According to this link: > > http://www.juniper.net/techpubs/software/junos/junos84/rn- > sw-84/rn-new-f > eatures.html > > SNMP separation has been added for logical routers. This > link: > > http://www.juniper.net/techpubs/software/junos/junos84/feature-guide- 84/ > id-11160689.html#id-11160689 > > states the same thing and directs you to look at the > JUNOS Network > Management Configuration Guide for more information. > However, that > portion of the documentation does not mention any such > feature. > > Has anyone tried to configure this, and if so, have you > been able to get > it to work? Any other documentation I should be looking > at for this > feature? > > thanks, > evt > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
