For anyone trying to do this, check out the docs that Alain sent, as well as 
the following config:

[EMAIL PROTECTED] show snmp
community lr-comm {
    clients {
        0.0.0.0/0;
    }
}
routing-instances-access;

I had this configured before, but I was querying using "[EMAIL PROTECTED]".  
Correct syntax is "m20a/[EMAIL PROTECTED]".

-evt

 

> -----Original Message-----
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of Eric Van Tol
> Sent: Thursday, September 27, 2007 3:30 PM
> To: BRIANT Alain
> Cc: [email protected]
> Subject: Re: [j-nsp] SNMP for logical routers
> 
> Thanks!  I was searching and couldn't find this bit of info.
>  
> 
> > -----Original Message-----
> > From: BRIANT Alain [mailto:[EMAIL PROTECTED] 
> > Sent: Thursday, September 27, 2007 3:08 PM
> > To: Eric Van Tol
> > Cc: [email protected]
> > Subject: Re: RE: [j-nsp] SNMP for logical routers
> > 
> > Hi Eric
> > 
> > Just have a look at theses documents and try to remove the 
> statement 
> > under community "routing-instances m20a" that I think you have 
> > configured.
> > 
> > After that follow what is written in those documents...
> > You have to add the LR name to the community in your SNMP requests.
> > 
> > regards
> > Alain
> > 
> > 
> > 
> > 
> http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-net-
> > mgmt/id-10826503.html#id-10826503
> > 
> > 
> http://www.juniper.net/techpubs/software/junos/junos84/swconfig84-net-
> > mgmt/jN18158.html#jN18158
> > 
> > 
> > 
> > ---- Messages d´origine ----
> > De: "Eric Van Tol" <[EMAIL PROTECTED]>
> > Date: Jeudi, Septembre 27, 2007 5:11 pm
> > Objet: RE: [j-nsp] SNMP for logical routers
> > 
> > > Thanks for the response.  I've tried this and I get the following 
> > > error: 
> > > [EMAIL PROTECTED] commit check 
> > > re0: 
> > > error: The routing instance(m20a) is not configured
> > > error: configuration check-out failed
> > > 
> > > Seems like the 'routing-instance' only allows routing-instances 
> > > and not logical-routers.  :-(
> > > 
> > > -evt
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > ________________________________
> > > 
> > >   From: BRIANT Alain [mailto:[EMAIL PROTECTED] 
> > >   Sent: Thursday, September 27, 2007 10:48 AM
> > >   To: Eric Van Tol
> > >   Cc: [email protected]
> > >   Subject: Re: [j-nsp] SNMP for logical routers
> > >   
> > >   
> > >   Yes Eric
> > >   
> > >   I have tried this and it's working well
> > >   
> > >   here is a sample config with a routing-instance
> > >   I believe it working also with a logical router the same way:
> > >   You will need the highlighted statements to have it working.
> > >   
> > >   Alain
> > >   
> > >   
> > >   
> > >   interfaces {
> > >       fe-0/0/0 {
> > >           unit 0 {    
> > >               family inet {
> > >                   address 10.20.0.11/24;
> > >               }
> > >           }
> > >       }
> > >   }
> > >   snmp {
> > >       community public {
> > >           authorization read-only;
> > >           routing-instances reseau1;
> > >       }
> > >       routing-instance-access;
> > >   }
> > >   routing-instances {
> > >       reseau1 {
> > >           instance-type virtual-router;
> > >           interface fe-0/0/0.0;
> > >           routing-options {
> > >               static {
> > >                   route 0.0.0.0/0 next-hop 10.20.0.1;
> > >               }
> > >           }
> > >       }               
> > >   }
> > >   
> > >   
> > >   
> > >   
> > >   Eric Van Tol a écrit :
> > >   
> > > 
> > >           Hi all,
> > >           According to this link:
> > >           
> > >           
> > http://www.juniper.net/techpubs/software/junos/junos84/rn-
> > > sw-84/rn-new-f
> > >           eatures.html
> > >           
> > >           SNMP separation has been added for logical routers.  
> > This 
> > > link:             
> > >           
> > > 
> > 
> http://www.juniper.net/techpubs/software/junos/junos84/feature-guide-
> > 84/
> > >           id-11160689.html#id-11160689
> > >           
> > >           states the same thing and directs you to look at the 
> > > JUNOS Network
> > >           Management Configuration Guide for more information.  
> > > However, that
> > >           portion of the documentation does not mention any such 
> > > feature.  
> > >           
> > >           Has anyone tried to configure this, and if so, have you 
> > > been able to get
> > >           it to work?  Any other documentation I should be 
> > looking 
> > > at for this
> > >           feature?
> > >           
> > >           thanks,
> > >           evt
> > >           _______________________________________________
> > >           juniper-nsp mailing list [email protected]
> > >           https://puck.nether.net/mailman/listinfo/juniper-nsp
> > >           
> > >           
> > >             
> > > 
> > > 
> > > 
> > 
> > 
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to