On Wed, 11 Jun 2008, Chuck Anderson wrote:
On Wed, Jun 11, 2008 at 06:32:34PM +0200, Jonas Frey wrote:
FWLF1613xx are multirate sonet-only SFP's. They can do OC3/OC12/OC48.
However they wont work with ethernet applications.
I read the spec sheet on the webpage you first linked to and I read
it as OC3/OC12/OC48 only also.
This does not mean in any fashion that Finisar does not make the
rght SFP for your application. I just have never used a multirate
SFP before that does OC48 and gigE ethernet so I am ignorant about
the choices out there.
m
Actually, it looks like the FWLF1631xx are mult-rate and support
Gigabit Ethernet speeds:
http://www.finisar.com/download_FEfGOsOptics_Matrix_Guide.pdf
In general any 3rd party SFP works fine with juniper routers since there
is no "pseudo quality-ID" feature as with cisco.
Sounds good. Thanks.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
