> > You can get a *little* more info from "show chassis pic":
> >
> > [EMAIL PROTECTED]> show chassis pic fpc-slot 2 pic-slot 1
> > FPC slot 2, PIC slot 1 information:
> > Type 4x G/E SFP, 1000 BASE
> > ASIC type SFP GE FPGA
> > State Online
> > PIC version 1.5
> > Uptime 175 days, 7 hours, 57 seconds
> >
> > PIC port information:
> > Fiber Xcvr vendor
> > Port Cable type type Xcvr vendor part number
> > Wavelength
> > 0 GIGE 1000LH SM FIBERXON INC. 6128C-SL5051G 1510 nm
> > 1 GIGE 1000LX SM CISCO-FINISAR 1000BASE-LX n/a
> > 2 GIGE 1000LX SM CISCO-FINISAR 1000BASE-LX n/a
> > 3 unknown cable SM CISCO-FINISAR F-WDM-1530 n/a
> >
> > So here we have a 1510nm SFP in 2/1/0 and a 1530nm SFP in 2/1/3. However,
> > it's not the complete EEPROM contents by any means...
>
> Can you get digital diagnostics info from these too?
Depends onm whether the SFP itself is DOM capable or not. Of the two
CWDM SFPs above, the 1510nm is DOM capable, and JunOS shows the info:
[EMAIL PROTECTED]> show interfaces diagnostics optics ge-2/1/0
Physical interface: ge-2/1/0
Laser bias current : 10.832 mA
Laser output power : 1.8110 mW / 2.58 dBm
Module temperature : 37 degrees C / 98 degrees F
Module voltage : 3.1820 V
Receiver signal average optical power : 0.3918 mW / -4.07 dBm
Laser bias current high alarm : Off
...
while the 1530nm is not:
[EMAIL PROTECTED]> show interfaces diagnostics optics ge-2/1/3
Physical interface: ge-2/1/3
Optical diagnostics : N/A
Steinar Haug, Nethelp consulting, [EMAIL PROTECTED]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
