Hello
In junose ihave this configuration on an interface:
i/nterface gigabitEthernet 1/0/1
shutdown
mtu 1522
encapsulation vlan
vlan bulk-config "test"
profile vlan bulk-config "test" "test pro"
vlan bulk-config "test" vlan-range 567 667
/my problem is that the interface is shutdown but i still have vlan
subinterface,pppoe interface and ppp in down state
and i cannot remove the "/vlan bulk-config "test" vlan-range 567 667"
/from the interface because it says:/dynamic interface exists
any ideas?
/
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
