Hi, Try shutting down the vlan-range with something like the following statement:
(config-if)#vlan bulk-config test shutdown vlan-range 567 667 also see: http://www.juniper.net/techpubs/software/erx/junose73/swconfig-link/html/dynamic-interfaces-bulk-config6.html Regards, Junaid On Fri, Jan 18, 2008 at 5:10 PM, SunnyDay <[email protected]> wrote: > Hello > In junose ihave this configuration on an interface: > > i/nterface gigabitEthernet 1/0/1 > shutdown > mtu 1522 > encapsulation vlan > vlan bulk-config "test" > profile vlan bulk-config "test" "test pro" > vlan bulk-config "test" vlan-range 567 667 > > /my problem is that the interface is shutdown but i still have vlan > subinterface,pppoe interface and ppp in down state > and i cannot remove the "/vlan bulk-config "test" vlan-range 567 667" /from > the interface because it says:/dynamic interface exists > > any ideas? > / > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
