Because those active routes are not in the mpls table. That is a summary banner for the sum of all routing tables.
Do a show route to see all routes in all tables. The "missing" active routes will be found spread over the remaining non-mpls.0 tables. HTHs -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Andrew Jimmy Sent: Tuesday, April 28, 2009 12:49 PM To: [email protected] Subject: [j-nsp] display mpls table When you run the following command, why you can't see the 679 active routes. junos> show route protocol mpls table mpls.0 mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden) + = Active Route, - = Last Active, * = Both 0 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive 1 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive 2 *[MPLS/0] 4w5d 13:23:40, metric 1 Receive {master} junos> _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
