Is this an ingress PE?
Nilesh
Andrew Jimmy wrote:
I know one can displays the route for the LDP FECs, stored in inet.3 using
'show route ldp table inet.3'. What if you want to see the label-switching
state stored in mpls.0
For this you use 'show route table mpls.0'; now I don't know why this
juniper router is not displaying the label-switching state stored in mpls.0
for 679 active labels.
-----Original Message-----
From: Stefan Fouant [mailto:[email protected]]
Sent: Tuesday, April 28, 2009 8:57 PM
To: Andrew Jimmy
Cc: [email protected]
Subject: Re: [j-nsp] display mpls table
On Tue, Apr 28, 2009 at 3:49 PM, Andrew Jimmy <[email protected]> wrote:
When you run the following command, why you can't see the 679 active
routes.
junos> show route protocol mpls table mpls.0
mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
1 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
2 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
mpls.0 is the label table. Try a 'show route table inet.3' to see the
routes.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
