When you run the following command, why you can't see the 679 active routes.
junos> show route protocol mpls table mpls.0
mpls.0: 679 destinations, 679 routes (679 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
0 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
1 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
2 *[MPLS/0] 4w5d 13:23:40, metric 1
Receive
{master}
junos>
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
