I've disabled flow control when thoroughput fall occured again. That didn't help, but I investigated new information. On cisco side I have noticed oversize errors on 10G interface, about 2000 per second. After juniper reboot there are no such errors. So I dive into reading about this errors. Any help appreciated.
2009/8/5 Michael Schedrin <[email protected]> > That shounds a bit depressive. A couple days ago I set up vstp to > communicate with cisco pvst+. Vstp was introduced in junos 9.4. Anyway > thanks for information, I'll try to roll back to 9.4 firstly. > > 2009/8/5 Malte von dem Hagen <[email protected]> > > Hi, >> >> Michael schrieb: >> > I use 9.5R2.7. Very interesting information about 9.3. Where did you >> hear >> > about it? >> >> we ran into several severe bugs on our EX switches, regarding different >> functions (aggregated ethernet, virtual chassis, spanning tree etc. etc.) >> and >> got that recommendation from our Juniper SE. That statement is some >> weeks/months >> old though, so I can't say if the situation changed. >> >> You can read some discussions about that topic in the mailing list >> archives. >> >> Kind regards, >> >> .m >> >> > > > -- > С уважением, > Щедрин Михаил > Начальник отдела ТП2 > SkyNet Telecom http://sknt.ru > тел. +7 911 934-79-83 > -- С уважением, Щедрин Михаил Начальник отдела ТП2 SkyNet Telecom http://sknt.ru тел. +7 911 934-79-83 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
