I'm only using Layer2 features, so perhaps that is why I'm not having problems.
On Thu, Aug 06, 2009 at 11:16:23AM +0400, Michael Schedrin wrote: > I had issue with bootp helper. It had stopped forwarding packets at the > moment. Also only reboot resolved the problem. > > 2009/8/5 Chuck Anderson <[email protected]> > > > On Wed, Aug 05, 2009 at 11:00:31AM +0200, Malte von dem Hagen wrote: > > > Hi, > > > > > > Michael schrieb: > > > > I use 9.5R2.7. Very interesting information about 9.3. Where did you > > hear > > > > about it? > > > > > > we ran into several severe bugs on our EX switches, regarding different > > > functions (aggregated ethernet, virtual chassis, spanning tree etc. etc.) > > and > > > got that recommendation from our Juniper SE. That statement is some > > weeks/months > > > old though, so I can't say if the situation changed. > > > > Interesting. I've been using aggregated ethernet and virtual chassis > > on 9.5R2.7 without major issues since May. Also dhcp-snooping, ARP > > inspection, IP Source Guard, and secure-access-port allowed-mac. One > > minor issue I had was failure to save/restore the persistent > > dhcp-binding-table on reboot. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
