I had issue with bootp helper. It had stopped forwarding packets at the moment. Also only reboot resolved the problem.
2009/8/5 Chuck Anderson <[email protected]> > On Wed, Aug 05, 2009 at 11:00:31AM +0200, Malte von dem Hagen wrote: > > Hi, > > > > Michael schrieb: > > > I use 9.5R2.7. Very interesting information about 9.3. Where did you > hear > > > about it? > > > > we ran into several severe bugs on our EX switches, regarding different > > functions (aggregated ethernet, virtual chassis, spanning tree etc. etc.) > and > > got that recommendation from our Juniper SE. That statement is some > weeks/months > > old though, so I can't say if the situation changed. > > Interesting. I've been using aggregated ethernet and virtual chassis > on 9.5R2.7 without major issues since May. Also dhcp-snooping, ARP > inspection, IP Source Guard, and secure-access-port allowed-mac. One > minor issue I had was failure to save/restore the persistent > dhcp-binding-table on reboot. > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- С уважением, Щедрин Михаил Начальник отдела ТП2 SkyNet Telecom http://sknt.ru тел. +7 911 934-79-83 _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
