Hi experts,
I want to make logical interfaces on a physical interface ge-0/2/0 of a Juniper
M10 router to connected to a the trunk port of a Summit Extreme x450 with the
ethertype 0x88a8 (IEEE 802.1ad).
I have the following configuration on the router.
ge-0/2/0 {
vlan-tagging;
gigether-options {
ethernet-switch-profile {
tag-protocol-id 0x88a8;
}
}
unit 50 {
vlan-tags outer 0x88a8.50;
family inet {
address 192.168.175.169/28;
}
}
}
I made the test with the 802.1q and it works but with 802.1ad didn't work.
Best regards.
_________________________________________________________________
News, entertainment and everything you care about at Live.com. Get it now!
http://www.live.com/getstarted.aspx
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
