just configure them? under interface stanze of each member of the virtual-chassis?
--- On Sat, 7/8/10, Piotr Bratkowski <[email protected]> wrote: > From: Piotr Bratkowski <[email protected]> > Subject: Re: [j-nsp] virtual-chassis and interfaces > To: [email protected] > Received: Saturday, 7 August, 2010, 5:23 AM > Hi, > > Just configure them. Just remember about naming > convention. > > Regards, > Piotr Bratkowski > > > > > W dniu 2010-08-06 21:00, snort bsd pisze: > > Hi all: > > > > With virtual-chassis, after I login, I only see > interfaces (under stanza "interfaces") on master, not those > interfaces on the back up mode or line card mode. > > > > How could I configure those interfaces that are not on > master? do I have to login each physical switch in order to > configure those interfaces? > > > > > > > > > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
