Hi Alexander & rest of the experts, The MTU size in the whole network is set to 4492. But on this router and the router connected to it, the MTU size recommended by the transmission team is 2000. So it's configured 2000 on this router and 1950 is configured on the router that connects to it. Can somebody guide me how should i play with the MTU size to resolve this issue. BGP also flaps with one of the RRs. I assume that this could also relate to the MTU issue.
Waiting for feedback. regards, Adnan. On Tue, May 31, 2011 at 11:37 PM, Alexander Frolkin <[email protected]> wrote: > Hi, > >> I have a MX240 router installed at a remote location. I am able to >> telnet/SSH the router but when I run a command that needs to return a >> large output (e.g. show log messages or show conf) the session hangs >> and then I have to re-establish the connection. > > This sounds a lot like an MTU problem between you and the MX240 --- this > is precisely the kind of behaviour you'd expect to see. > > As a temporary workaround, you can try setting the MTU on the > corresponding interface of the box you're SSHing from to something low. > > > Alex > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
