show route advertising-protocol bgp <neighbor IP> extensive Thank you,
-- Doug Hanks - JNCIE-ENT #213, JNCIE-SP #875 Sr. Systems Engineer Juniper Networks On 10/21/11 9:15 AM, "Loopback EZ" <[email protected]> wrote: >I am replacing an old Cisco router with a Brocade MLX as IBGP peer to a >Juniper M10. I am only getting 250K routes and I have NO filtering >enabled. I know that the Juniper is receiving a full EBGP route table >but is only passing 250K to any of its internal IBGP peers including the >old Cisco. Suspect that there is route summarization happening so it >would not overrun an old Cisco SUP module. Where should I look for >summarization or any other possible cause in the Juniper config? > > >_______________________________________________ >juniper-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
