Dear Isidoro, glad it worked for you that way.
Please keep in mind that the Fujitsu MHT2030AT are long time end-of-life and the disk you purchased was likely used already. Also the -AT Fujitsu drives are not rated for 24x7 operation thus are a potential problem. Only the -AS series are classified for "enhanced" 24x7 operation. Anyway...if i was about to replace a hdd on a routing engine i would only use a SSD nowadays. Best regards, Jonas Frey Am Freitag, den 18.11.2011, 15:17 +0100 schrieb Juniper GOWEX: > Dear Jonas, > > > Two weeks ago we replaced the HDD > ( > http://juniper.cluepon.net/Replacing_the_harddisk_with_solid_state_flash ). > We bought a identical HDD ( P/N MHT2030AT ) and copy the data > 1:1 ( using the windows software "EASEUS Todo Backup Free > 3.0" ), > The cloning process took 35 min approximately. > After the restart the error disappeared. > Thank you very much for your help > > Isidoro > > El 22/09/2011 2:52, Jonas Frey (Probe Networks) escribió: > > Dear Isidoro, > > > > you cant copy the data 1:1....atleast not without alot of work. > > The best thing would be if you reinstall JunOS via a install media > > (pcmcia/cf card) once you replaced the hard disk. > > Its very easy to replace the hard disk on either RE2/3/4/5...its > > normally only secured by 4 screens on the RE. > > Make sure to save your config files (JunOS config, SSH keys, other data > > like home directorys, logs etc) before you replace the HDD if > > neccessary. > > > > Best regards, > > Jonas > > > > Am Mittwoch, den 21.09.2011, 17:18 +0200 schrieb Isidoro Cristobal: > > > Hi, > > > > > > First of all thank you very much for your quick response . > > > > > > How to save the data to the new hard disk? Do you know a procedure for > > > replacing hard disk ? > > > > > > Best Regards, > > > > > > Isidoro > > > > > > > > > > > > El 20/09/2011 17:29, Jonas Frey (Probe Networks) escribió: > > > > Hi, > > > > > > > > you are correct, the disk exceeded the maximum write errors permitted by > > > > the SMART value and thus is marked as bad. Prepare for a complete > > > > failure of the drive soon (1-30 days likely). > > > > May be the right time to upgrade the harddisk to a SSD. > > > > http://juniper.cluepon.net/Replacing_the_harddisk_with_solid_state_flash > > > > > > > > Best regards, > > > > Jonas > > > > > > > > > > > > > > > > Am Dienstag, den 20.09.2011, 17:09 +0200 schrieb Juniper GOWEX: > > > > > Hi all, > > > > > > > > > > From yesterday at the log of my M20 are the following message : > > > > > > > > > > smartd[2595]: Device: /dev/ad1a, Failed attribute: > > > > > (200)Write > > > > > Error Rate > > > > > > > > > > It´s informative, but i think that there is a problem with my HDD ( I > > > > > still have to run the smartd commands ) . > > > > > > > > > > Somebody had this problem ? > > > > > > > > > > > > > > > Best Regards > > > > > > > > > > Isidoro > > > > > > > > > > > > > > > _______________________________________________ > > > > > juniper-nsp mailing list [email protected] > > > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > > > > > > > > _______________________________________________ > > > > > juniper-nsp mailing list [email protected] > > > > > https://puck.nether.net/mailman/listinfo/juniper-nsp
signature.asc
Description: This is a digitally signed message part
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
