Thanks! I just heard from another one of our engineers who is much more familiar with Juniper than I am. He already knew about this, so I was just a little slow on the uptake. lol
Thanks to all for the help. On Tue, Mar 13, 2012 at 6:05 PM, Harry Reynolds <[email protected]> wrote: > Yes, I believe that is enough to cause your issue. > > I believe that independent domain might help with the global as loop check, > but it too is global and needs to be carefully tested. > > Else use as loops, which should also be tested. ;) Adding will flap bgp IIRC. > > Regards > > > > > > > > -----Original Message----- > From: John Neiberger [mailto:[email protected]] > Sent: Tuesday, March 13, 2012 4:55 PM > To: Harry Reynolds > Cc: Mohammad; [email protected] > Subject: Re: [j-nsp] Hidden IPv4 iBGP routes > > We do have the following configured under bgp: > > group SomeGroupName { > type external; > traceoptions { > file ipv4-ebgp-customer-logs size 10m files 10; > flag state; > } > description "SomeGroup"; > family inet { > unicast; > } > remove-private; > local-as XXXXX private; > } > > I wish I could post that stuff without editing. hehe Is that enough > to break things? And if so, what is the fix? > > Thanks! > > > On Tue, Mar 13, 2012 at 5:21 PM, Harry Reynolds <[email protected]> wrote: >> Are there any vrfs on this box using AS XXXX? >> >> In JUNOS AS loop check is global, so also applies to any vrfs and their >> configured asns. >> >> HTHs >> >> >> >> -----Original Message----- >> From: [email protected] >> [mailto:[email protected]] On Behalf Of John Neiberger >> Sent: Tuesday, March 13, 2012 4:17 PM >> To: Mohammad >> Cc: [email protected] >> Subject: Re: [j-nsp] Hidden IPv4 iBGP routes >> >> Okay, there is no local AS configured under protocols bgp, and the AS >> configured under routing options is correct. >> >> On Tue, Mar 13, 2012 at 5:11 PM, John Neiberger <[email protected]> wrote: >>> I'll do that right now. I checked the AS under routing-options, but >>> didn't check for a local-as. Thanks! I'm very new to Juniper, so I'm >>> still pretty lost. >>> >>> On Tue, Mar 13, 2012 at 4:29 PM, Mohammad <[email protected]> wrote: >>>> I think you need to check the autonomous-system under the routing-options >>>> hierarchy; and the local-as under protocols bgp group hierarchy; >>>> >>>> >>>> >>>> Mohammad Salbad >>>> >>>> _______________________________________________ >>>> juniper-nsp mailing list [email protected] >>>> https://puck.nether.net/mailman/listinfo/juniper-nsp >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
