I'm not up to speed on the MLPPP stuff but would look at MX240/MX480/MX960 platform for sure. The MX80 can only handle about 4k sessions and has no support for LNS yet I don't believe (coming though if I'm not mistaken).
Paul -----Original Message----- From: Liam Murphy [mailto:[email protected]] Sent: March-26-12 6:30 AM To: Paul Stewart; [email protected] Subject: RE: [j-nsp] Juniper BRAS About 4000 sessions. I am just not sure if I can have MLPPPoLT2P (i.e. up to 8 ppp sessions bundled inside a MLPPP session that terminates on a Juniper that is acting as an LNS, with subscriber QoS). Thanks! -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Paul Stewart Sent: 23 March 2012 20:40 To: [email protected] Subject: Re: [j-nsp] Juniper BRAS What kind of capacity? M/MX is only option outside of E/ERX series... -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Liam Murphy Sent: March-23-12 1:22 PM To: [email protected] Subject: [j-nsp] Juniper BRAS Which Juniper router (not E-Series) is best suited for a BRAS. (L2TP LNS with MLPPP) Regards Liam _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
