MX has a gig ether option for doing this. I'd check and see if EX4550 does. EX 4200 does not AFAIK. On Oct 10, 2012 10:38 AM, "Benny Amorsen" <[email protected]> wrote:
> I am considering building a very simple setup with a number of ethernet > interfaces on one switch each CCC-tunnelled through a common fiber to > another switch. I.e. simply emulating a typical ethernet CWDM using > EoMPLS. > > One feature which would be very handy is link state propagation across > those EOMPLS links. Ideally, if the fiber breaks, the ports at each end > go down so the equipment at each end quickly become aware of the break. > Even better if loss of link on a port at one end also shuts down the > link at the other end. > > Can the EX series do that? I'm thinking of the EX4550 in particular, but > information about other EX-switches is welcome as well. > > > /Benny > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
