gigether-options asynchronous-notification is the command for MX -- Tim
On Wed, Oct 10, 2012 at 11:16 AM, Tim Jackson <[email protected]> wrote: > MX has a gig ether option for doing this. I'd check and see if EX4550 > does. EX 4200 does not AFAIK. > On Oct 10, 2012 10:38 AM, "Benny Amorsen" <[email protected]> wrote: > >> I am considering building a very simple setup with a number of ethernet >> interfaces on one switch each CCC-tunnelled through a common fiber to >> another switch. I.e. simply emulating a typical ethernet CWDM using >> EoMPLS. >> >> One feature which would be very handy is link state propagation across >> those EOMPLS links. Ideally, if the fiber breaks, the ports at each end >> go down so the equipment at each end quickly become aware of the break. >> Even better if loss of link on a port at one end also shuts down the >> link at the other end. >> >> Can the EX series do that? I'm thinking of the EX4550 in particular, but >> information about other EX-switches is welcome as well. >> >> >> /Benny >> >> >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
