On 06/12/12 10:58, Per Westerlund wrote:
To follow up my own post (even more to follow), here is the config you use
on a J-series router to put it in router-mode. Nothing magic, just some
configuration. This will work with SRX as well, there is nothing J-series
specific in here. This config is found in
/etc/config/jsr-series-routermode-factory.conf, and the box I picked it from
was running Junos 10.2R4.8
Is this *actually* in router mode, or is it just in a permit-all flow mode?
In particularly, you seem to be missing a "packet-mode" statement for
IPv4 or MPLS (which also disables flow mode for IPv4)
What does "show security flow status" say?
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
