Thanks Pavel... So is there anything reasonably priced in the Juniper lineup for this kind of situation or do we look at Cisco/other?
Cheers, Paul -----Original Message----- From: Pavel Lunin [mailto:[email protected]] Sent: January-10-13 11:32 AM To: Paul Stewart Cc: [email protected] Subject: Re: [j-nsp] EX Switch Question Just don't go there. EX is in no way a metro SP switch. Very common case, we've been discussing it with many customers, who their-selves want a Juniper metro SP solution, maybe once a week since the EX series was launched. After all that I am 100% sure this is not what EX is all about. 10.01.2013 18:23, Paul Stewart wrote: > Thanks but this is pure layer2 deployments (typically). I should have > clarified that.... some of the VLAN's have IP but most are to link > buildings together within a metro etc.... > > Really, this is more of a metro ethernet type of environment..... > > I'll read up again on this but I'm comparing this against a tried and > true Cisco solution we've used many times and it just worked (rather > simply too)..... with what I've seen/read so far on the Juniper front, > this is going to be a problem to implement - really hoping someone can > prove me wrong though ;) > > Paul > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
