Dear All
We have high end SRX3600 connected to layer2 switch and then to two gateway routers, and we have a static default route to R1 with default preference (5) and to R2 with preference 10, we need to track the IP of R1 so that in case we couldn't ping R1 the route to prefer R2 i.e. in case the link between R1 and the layer2 switch went down the route to prefer R2. Noting that we were able to accomplish the above requirements with branch SRX using either two options (set services ip-monitoring) or (set services rpm) Unfortunately the mentioned commands are not supported on high end SRX Any ideas. Regards A.Hasan _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
