You could run VRRP on R1 and R2 giving R1 the higher priority. Have the static default on the SRX3600 pointing to the VRRP IP
Darren http://www.mellowd.co.uk/ccie > From: [email protected] > To: [email protected] > Date: Tue, 13 Aug 2013 13:16:49 +0300 > Subject: [j-nsp] IP Monitoring/Tracking (SLA) on high end SRX > > Dear All > > > > We have high end SRX3600 connected to layer2 switch and then to two gateway > routers, and we have a static default route to R1 with default preference > (5) and to R2 with preference 10, we need to track the IP of R1 so that in > case we couldn't ping R1 the route to prefer R2 i.e. in case the link > between R1 and the layer2 switch went down the route to prefer R2. > > Noting that we were able to accomplish the above requirements with branch > SRX using either two options (set services ip-monitoring) or (set services > rpm) > > Unfortunately the mentioned commands are not supported on high end SRX > > Any ideas. > > > > Regards > > A.Hasan > > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
