1) are you running 13.3? 2) are you using a routing instance? On Sep 16, 2014, at 8:02 AM, [email protected] wrote:
> Juniper Geniuses, > > I'm trying to set up some basic DHCP relay on an EX9200. The CLI rejects the > "forwarding-options bootp" syntax, saying "unsupported platform". > > Googling for some documentation, I came across "DHCP Relay Minimum > Configuration": > > http://www.juniper.net/techpubs/en_US/junos13.3/topics/example/dhcp-subscriber-access-dhcp-relay-minimum-configuration.html > > Now, while I've come to understand that this DHCP Relay configuration was > specifically meant to be for MX subscriber management, this particular page > happens to be under the EX9200 documentation (I also realize the EX9200 is > basically an MX). I've also read that it's kind of buggy (or was in 2012...). > I also tried labbing this using some Fireflies and a VMX in Junosphere but > couldn't get it working. > > Anybody out there know if this is the correct way to do DHCP relaying on an > EX9200? If not, could somebody please provide a config example of how to do > this? > > Regards, > > Chris > > > Chris Jones, JNCIE-ENT #272 / JNCIP-SP > SDN Engineer > www.sdnessentials.com > Cell: 858-888-0373 > E-Mail: [email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
