Hi, Bootp is not supported on new version of junos. You need to use dhcp-relay with 9200. You may use 13.3r5 which has almost all dhcp related fix.
Config is same as mentioned in kb. You need to define active server group and define as forwarding option for each rvi. Regards, Iftikhar Sent from my iPhone > On Sep 16, 2014, at 6:51 PM, "[email protected]" > <[email protected]> wrote: > > Juniper Geniuses, > > I'm trying to set up some basic DHCP relay on an EX9200. The CLI rejects the > "forwarding-options bootp" syntax, saying "unsupported platform". > > Googling for some documentation, I came across "DHCP Relay Minimum > Configuration": > > http://www.juniper.net/techpubs/en_US/junos13.3/topics/example/dhcp-subscriber-access-dhcp-relay-minimum-configuration.html > > Now, while I've come to understand that this DHCP Relay configuration was > specifically meant to be for MX subscriber management, this particular page > happens to be under the EX9200 documentation (I also realize the EX9200 is > basically an MX). I've also read that it's kind of buggy (or was in 2012...). > I also tried labbing this using some Fireflies and a VMX in Junosphere but > couldn't get it working. > > Anybody out there know if this is the correct way to do DHCP relaying on an > EX9200? If not, could somebody please provide a config example of how to do > this? > > Regards, > > Chris > > > Chris Jones, JNCIE-ENT #272 / JNCIP-SP > SDN Engineer > www.sdnessentials.com > Cell: 858-888-0373 > E-Mail: [email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
