Okay, so the syntax is what I'm seeing on that doc for the most part (plus your recommended overrides). Thank you!
Chris Jones, JNCIE-ENT #272 / JNCIP-SP SDN Engineer www.sdnessentials.com Cell: 858-888-0373 E-Mail: [email protected] --------- Original Message --------- Subject: Re: [j-nsp] EX9200 DHCP Relay From: "Tim Jackson" <[email protected]> Date: 9/16/14 8:04 am To: [email protected] Cc: "jnsp" <[email protected]> Basically everything is moving to jdhcpd.. It's only really licensed on MX iirc (shouldn't be on 9200?) set forwarding-options dhcp-relay overrides allow-snooped-clients set forwarding-options dhcp-relay overrides always-write-giaddr set forwarding-options dhcp-relay overrides trust-option-82 set forwarding-options dhcp-relay overrides send-release-on-delete set forwarding-options dhcp-relay server-group DHCP-1 1.2.3.4 set forwarding-options dhcp-relay group DYNAMIC active-server-group DHCP-1 set forwarding-options dhcp-relay group DYNAMIC interface ae1.101 For most networks, you probably don't need those overrides, but if you have something else downstream doing DHCP snooping and option 82 insertion, you have to tell it to trust it.. On Tue, Sep 16, 2014 at 7:02 AM, <[email protected]> wrote: > Juniper Geniuses, > > I'm trying to set up some basic DHCP relay on an EX9200. The CLI rejects the > "forwarding-options bootp" syntax, saying "unsupported platform". > > Googling for some documentation, I came across "DHCP Relay Minimum > Configuration": > > http://www.juniper.net/techpubs/en_US/junos13.3/topics/example/dhcp-subscriber-access-dhcp-relay-minimum-configuration.html > > Now, while I've come to understand that this DHCP Relay configuration was > specifically meant to be for MX subscriber management, this particular page > happens to be under the EX9200 documentation (I also realize the EX9200 is > basically an MX). I've also read that it's kind of buggy (or was in > 2012...). I also tried labbing this using some Fireflies and a VMX in > Junosphere but couldn't get it working. > > Anybody out there know if this is the correct way to do DHCP relaying on an > EX9200? If not, could somebody please provide a config example of how to do > this? > > Regards, > > Chris > > > Chris Jones, JNCIE-ENT #272 / JNCIP-SP > SDN Engineer > www.sdnessentials.com > Cell: 858-888-0373 > E-Mail: [email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
