Quoting Eric Van Tol <[email protected]>
-----Original Message-----
From: juniper-nsp [mailto:[email protected]] On
Behalf Of Robert Hass
Sent: Monday, December 01, 2014 7:30 AM
To: [email protected]
Subject: [j-nsp] Transfer some task from MX to VRR
Hi
Just readed release notes for 14.2 and I found that starting this release I
can transfer some task to external VRR.
So my idea is to move all BGP from MX80 to VRR. But how it can be performed
for external BGP sessions where I have just /30 or /31 subnets to customers
? (of course without ebgp multihop).
I'm pretty sure the VRR is mostly for solving the problem of iBGP
session scaling. If that's not the case, I'm sure someone will
correct me.
You don't have much choice with eBGP if you don't want to use
multihop, unless you want to backhaul every customer circuit via L2
to your VRR, in which case the VRR is basically the gateway for the
customer's circuit.
-evt
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
Sent via the Samsung GALAXY S® 5, an AT&T 4G LTE smartphone
-------- Original message --------
From: Eric Van Tol <[email protected]>
Date:12/01/2014 8:09 AM (GMT-05:00)
To: [email protected]
Cc:
Subject: Re: [j-nsp] Transfer some task from MX to VRR
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
