We are currently using QFX5100s for a new deployment.
VCF, l2, mstp, ospf, bgp, lacp
There are a number of bugs. Most are getting fixed. I'm currently running the
absolute latest version simply to get the fixes I need.
The biggest issue at the moment is that the QFX boots with all ports UP, even
though it can't yet forward packets. This is a big issue where attached servers
are dual connected and use link -state to determine which port to send on. This
is not a Junos bug, as Junos isn't loaded until much later in the boot
sequence. I have been told a boot fix is on it's way before the end of this
month.
Darren
> From: [email protected]
> Date: Thu, 15 Jan 2015 10:30:54 +0100
> To: [email protected]
> Subject: [j-nsp] Experience with QFX5100 13.2 & 14.1
>
> Dear all,
>
> I was wondering what experience, if any, you have had with QFX5100.
>
> Of special interest would be what JunOS version you are running, what
> features you have enabled, and if you consider them production-ready.
>
>
> This question is open-ended on purpose.
>
>
> Thanks,
> Richard
> _______________________________________________
> juniper-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
