Just to add to this. The 48T is not currently seeing a Juniper branded QSFP LR4. The same optic has no issues in the 24Q and 48S.
> From: [email protected] > To: [email protected]; [email protected] > Date: Thu, 15 Jan 2015 11:30:30 +0000 > Subject: Re: [j-nsp] Experience with QFX5100 13.2 & 14.1 > > We are currently using QFX5100s for a new deployment. > VCF, l2, mstp, ospf, bgp, lacp > There are a number of bugs. Most are getting fixed. I'm currently running the > absolute latest version simply to get the fixes I need. > The biggest issue at the moment is that the QFX boots with all ports UP, even > though it can't yet forward packets. This is a big issue where attached > servers are dual connected and use link -state to determine which port to > send on. This is not a Junos bug, as Junos isn't loaded until much later in > the boot sequence. I have been told a boot fix is on it's way before the end > of this month. > Darren > > From: [email protected] > > Date: Thu, 15 Jan 2015 10:30:54 +0100 > > To: [email protected] > > Subject: [j-nsp] Experience with QFX5100 13.2 & 14.1 > > > > Dear all, > > > > I was wondering what experience, if any, you have had with QFX5100. > > > > Of special interest would be what JunOS version you are running, what > > features you have enabled, and if you consider them production-ready. > > > > > > This question is open-ended on purpose. > > > > > > Thanks, > > Richard > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
