have you considered writing an event script for this ?
On Tue, Apr 7, 2015 at 10:15 PM, Matthew Crocker <[email protected]> wrote: > > Hello, > > A customer with two connections to my mx240. I want to police their total > bandwidth to 800mbps. Right now I have a 800mbps policer but that gives them > 800mbps on each circuit. > > Customer Interface 1 is a VLAN on a 10G interface > Customer Interface 2 is a VLAN on a 1G interface > > Each interface has its own /30 IP subnet with a BGP session on each customer > IP > > Customer buys X bandwidth we want to give them X bandwidth over a pair of > circuits. If one circuit goes down the policer needs to be set to the X > bandwidth the purchased. > > Thanks > > -Matt > > -- > Matthew S. Crocker > President > Crocker Communications, Inc. > PO BOX 710 > Greenfield, MA 01302-0710 > > E: [email protected] > P: (413) 746-2760 > F: (413) 746-3704 > W: http://www.crocker.com > > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
