On 29/Apr/15 18:58, Colton Conor wrote: > > I notice that the Juniper JTAC recommends Junos 13.3R4.6 for the MX104 and > PTX series? If Junos 13.3R4.6 is stable enough to run on these platforms, > then I assume its stable enough to run on the other MX platforms, the MX80 > to be specific?
The MX104 and PTX are newer than the MX80/240/480/960, so the oldest (read: most stable) code JTAC will recommend will be much newer compared to what is recommended for the other platforms. Mark. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
