We were hit by this. 13.3R4 is safe from this issue, and 13.3R6 is apparently fixed but we have not yet upgraded.
I believe the issue is related to minor differences in hardware because we do not have problems with 13.3R5 on any routers except for one, which has essentially identical hardware and software to the others. The issue takes approximately 48 hours to present itself, and was very obvious when it was happening. Power off / power on of the effected MPC will recover it temporarily. We ran into this with MX960 and the 32x10 MPC4. Regards, -Phil On May 1, 2015, at 3:08 PM, Gavin Henry <ghe...@suretec.co.uk> wrote: >> About memory leak on PFE with inline jflow, this is PR1071289, affected >> releases 13.3R5, 14.1R4, 14.2R1. > > How long does it take to show? > > -- > Kind Regards, > Gavin Henry. > _______________________________________________ > juniper-nsp mailing list juniper-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp
