So what version does the community recommend for an MX80. Looking to make the jump from 12.3 to 13.3.
On Thu, Apr 30, 2015 at 5:04 AM, Olivier Benghozi < [email protected]> wrote: > MX104 is not supported in 12.3, it's that simple (13.2 minimum). > And about features, MX104 is on par with other MX only in 13.3 anyway. > > Not very different on newer PTX chassis. > > > > Le 30 avr. 2015 à 08:18, Mark Tinka <[email protected]> a écrit : > > > > On 29/Apr/15 18:58, Colton Conor wrote: > >> > >> I notice that the Juniper JTAC recommends Junos 13.3R4.6 for the MX104 > and > >> PTX series? If Junos 13.3R4.6 is stable enough to run on these > platforms, > >> then I assume its stable enough to run on the other MX platforms, the > MX80 > >> to be specific? > > > > The MX104 and PTX are newer than the MX80/240/480/960, so the oldest > > (read: most stable) code JTAC will recommend will be much newer compared > > to what is recommended for the other platforms. > > > > Mark. > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
