Hi Victor, The only way I am aware of that works with ex4200s is tunnelling over MPLS. This would require MPLS on the backbone to work.
http://www.juniper.net/techpubs/en_US/junos13.2/topics/task/configuration/mpls-ex-series-provider-edge-switches-ccc-cli.html Cheers, Mark On Tue, May 12, 2015 at 1:49 PM, Victor Sudakov <[email protected]> wrote: > Colleagues, > > I have several ex4200-24t switches with JunOS 12.3R6.6 and an Advanced > licensed routing protocols license. > > Is there a way to tunnel L2 traffic over an IP network between two > ex4200-24t switches? I wish to emulate a L2 trunk (with several VLANs, > MSTP and OAM) over a Layer3 network. > > Now I am doing it with the help of two FreeBSD servers encapsulating > Ethernet frames into UDP packets via a complicated netgraph setup. I > would be happy to get rid of them and use only ex4200-24t switches if > possible. > > Thank you for any input. > > -- > Victor Sudakov, VAS4-RIPE, VAS47-RIPN > sip:[email protected] > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Regards, Mark L. Tees _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
