The 16x10G cards are not going to be full line rate at all packet sizes and depending on destinations can't push full line rate due to limitations to fabric BW on each PFE.
Phil -----Original Message----- From: "Robert Hass" <[email protected]> Sent: 9/26/2015 8:42 AM To: "[email protected]" <[email protected]> Subject: [j-nsp] Cheaper way to have 2x100G and 16x10G wire-speed in MX480 Hi What is cheapest way to choose proper MPC/MICs to have 2x100G and 16x10G all wire-speed plus possibility to extend my configuration to total 32x10G and 4x100G ? Is it possible to have 200Gbps (400G in both directions) per slot in cast of malfunction of one fabric card ? What you can suggest ? Rob _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
