If you want full line rate to the fabric on all ports you can only use 12, but 
the oversubscription is small. The fabric BW is like 37G for the set of four 
ports.  If you are sending traffic between two ports on the same PFE it doesn't 
count and you can get line rate on all 16 ports if your traffic makeup fits and 
connections are in the right places.  

In the OP scenario I assume he is using the 10G for clients and 100G as uplinks 
so he would run into the limitation.  

This was on the 960 I am not sure if the 240 is any different.  

Phil

-----Original Message-----
From: "joel jaeggli" <[email protected]>
Sent: ‎9/‎27/‎2015 3:49 PM
To: "Phil Bedard" <[email protected]>; "Robert Hass" <[email protected]>; 
"[email protected]" <[email protected]>
Subject: Re: [j-nsp] Cheaper way to have 2x100G and 16x10G wire-speed in MX480

On 9/27/15 12:01 PM, Phil Bedard wrote:
> The 16x10G cards are not going to be full line rate at all packet
> sizes and depending on destinations can't push full line rate due to
> limitations to fabric BW on each PFE.

afaik the 16 x 10 fixed mpc was 1.2:1 oversubscribed.

> Phil
> 
> -----Original Message----- From: "Robert Hass" <[email protected]> 
> Sent: ‎9/‎26/‎2015 8:42 AM To: "[email protected]"
> <[email protected]> Subject: [j-nsp] Cheaper way to have
> 2x100G and 16x10G wire-speed in MX480
> 
> Hi What is cheapest way to choose proper MPC/MICs to have 2x100G and
> 16x10G all wire-speed plus possibility to extend my configuration to
> total 32x10G and 4x100G ?
> 
> Is it possible to have 200Gbps (400G in both directions) per slot in
> cast of malfunction of one fabric card ?
> 
> What you can suggest ?
> 
> Rob _______________________________________________ juniper-nsp
> mailing list [email protected] 
> https://puck.nether.net/mailman/listinfo/juniper-nsp 
> _______________________________________________ juniper-nsp mailing
> list [email protected] 
> https://puck.nether.net/mailman/listinfo/juniper-nsp
> 


_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to