On 9/27/15 12:01 PM, Phil Bedard wrote: > The 16x10G cards are not going to be full line rate at all packet > sizes and depending on destinations can't push full line rate due to > limitations to fabric BW on each PFE.
afaik the 16 x 10 fixed mpc was 1.2:1 oversubscribed. > Phil > > -----Original Message----- From: "Robert Hass" <[email protected]> > Sent: 9/26/2015 8:42 AM To: "[email protected]" > <[email protected]> Subject: [j-nsp] Cheaper way to have > 2x100G and 16x10G wire-speed in MX480 > > Hi What is cheapest way to choose proper MPC/MICs to have 2x100G and > 16x10G all wire-speed plus possibility to extend my configuration to > total 32x10G and 4x100G ? > > Is it possible to have 200Gbps (400G in both directions) per slot in > cast of malfunction of one fabric card ? > > What you can suggest ? > > Rob _______________________________________________ juniper-nsp > mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing > list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp >
signature.asc
Description: OpenPGP digital signature
_______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
