Hi guys

Thank you all, I will upgrade to version 64b 14.2R7

jader@MX240-RE0> show chassis routing-engine
Routing Engine status:
  Slot 0:

    DRAM                     * 3313 MB *(16384 MB installed)
    Memory utilization          40 percent




2016-09-16 6:38 GMT-03:00 Mark Tinka <mark.ti...@seacom.mu>:

> I'd suggest 14.2R7. It's been through the wash a few times and is
> scent-free...
>
> Mark.
>
> On 16/Sep/16 07:33, Chris Kawchuk wrote:
> > This is what I always use:
> >
> > http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476&actp=RSS
> >
> > 14.1R7 seems to be the one that's more "current-yet-recommended".
> > Your RE-1800X4's would benefit from the 64 bit version too...
> >
> > - CK.
> >
> >
> > On 16 Sep 2016, at 1:34 pm, Sachin Rai <sachinrai1...@hotmail.com>
> wrote:
> >
> >> If you do not want to do any of the above, go with jtac recommended
> junos.
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp@puck.nether.net
> > https://puck.nether.net/mailman/listinfo/juniper-nsp
> > .
> >
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/juniper-nsp
>



--
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to