The enhanced midplane allows you already to use higher bandwidth with redundancy at least on the MX960. 205G per slot (not enhanced) against 240G per slot (enhanced) So if you want to use a MPC5E-100G10G and populate every port (2x100G plus 4x10G) you need the enhanced midplane and the SCBE2. Same for the MPC5E-40G10G and the Q-Versions of these cards. Otherwise you overbook the midplane.
— Sebastian Becker > Am 14.11.2017 um 11:38 schrieb Olivier Benghozi <[email protected]>: > > > While I don't care about SONET/SDH in 2017 (sorry...), the enhanced midplane > (in the MX240/480/960 MX generation) also (mainly?) allows more bandwidth per > slot with the future SCBE3. > You may find a fugitive Juniper 2016 PDF on your preferred search engine > ("SCBE3" "premium3" "mx"). > >> On 14 nov. 2017 at 09:56, Karl Gerhard <[email protected]> wrote : >> >> this article is mentioning an enhanced MX480 midplane. This is the first >> time I hear of that: CHAS-BP-MX480-S (=Non-Enhanced) vs. CHAS-BP3-MX480-S >> (=Enhanced) >> https://www.juniper.net/documentation/en_US/release-independent/junos/topics/concept/scbe2-mx480-desc.html >> >> Is there anyone who can give more details about the enhanced midplane? >> As far as I understand the cross-coupling of clock input is only related to >> SONET/SDH stuff, is that correct? > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
