> Sebastian Becker > Sent: Friday, December 08, 2017 6:35 PM > > Hi all, > > so after checking that with Juniper we have got an update: > > MPC7E with SCBE2, Fabric Redundancy, Premium2 und Premium3: 340G > > Premium2 Chassis (non-enhanced midplane): > MPC5E 205G > MPC7E 400G - now 340G > > Premium3 Chassis (enhanced midplane): > MPC5E 240G > MPC7E 480G - now 340G > > So even the MPC7-10G will have a performace penalty on both midplanes in > the redundancy mode. > Well yes, unfortunately SCBE2 is hugely underpowered for MPC7 -need to wait for SCBE3 to get redundancy. For now we all need to run in performance mode, if I remember correctly fabric queuing/dropping worked as expected (trying to protect EF) in redundancy/overload mode with just two or even one SCBE2, some pre-classifier related problems, as always :)
adam netconsultings.com ::carrier-class solutions for the telecommunications industry:: _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
