What Layer 3 features are not supported on the ACX5000 that you need to be able to provide ?
-Aaron -----Original Message----- From: juniper-nsp [mailto:[email protected]] On Behalf Of Pshem Kowalczyk Sent: Tuesday, December 19, 2017 4:07 PM To: [email protected] Subject: [j-nsp] Stiching L2 to L3 on MX480 Hi, We have an existing setup consisting of a number of ACX5k and MX480 (single MPLS domain). We generally provide L2 services out of the ACXes and L3 out of the MXes. Now, a new requirement emerged to provide L3 (with features that ACX can't provide) in locations where we can't justify the MX. I'd like to know if it's possible to do the following (and if anything special is required on the MX) 1. Build a L2 PWE3 taking whole port on the ACX and logically terminate it on the MX 2. The logical port on the MX (I presume 'lt') will be used to terminate individual dot1q and QinQ services into L3 VPNs. Looking at the documentation it appears to be possible, but I'd like to know what sort of limitations this solution might have, particularly when it comes to QoS on the MX. kind regards Pshem _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
